Specialized Physical Therapy for Men, Women & Children | Licensed in South Carolina
Shoulder replacement changes the surfaces that move against one another and, in a reverse replacement, changes the mechanical arrangement used to raise the arm. The operation can relieve pain and restore useful movement, but the implant does not replace the surrounding muscles, nerves, or healing tissues. Their condition influences which replacement is recommended, what needs protection afterward, and which activities are realistic goals.[1,2]
The humeral head is the rounded upper end of the arm bone. It moves against the glenoid, the shallow socket in the shoulder blade. An anatomic total shoulder replacement places a metal ball on the humerus and a plastic bearing surface in the glenoid. A reverse replacement attaches a metal ball to the shoulder blade and places a plastic lined cup on the upper arm. Hemiarthroplasty replaces only the humeral surface, leaving the natural socket in place.[1]
The bearing allows movement, while the underlying components transmit force into bone. Depending on the design and bone quality, fixation uses cement, a press fit, screws, or surfaces intended for bone integration. An implant needs both a stable connection to bone and surrounding tissues capable of controlling movement. A problem in either can affect the shoulder even when the artificial bearing surfaces remain intact.[1,2]
The natural socket is shallow, allowing considerable movement but providing relatively little bony containment. The rotator cuff compresses the ball against the socket while helping rotate the arm. When the deltoid, the large muscle covering the shoulder, contracts to raise the arm, part of its pull tends to move the ball upward. The cuff balances that pull so that the ball remains sufficiently centered as the arm rotates.[2]
An anatomic replacement preserves this arrangement and depends on a functioning cuff. If the cuff cannot control the ball, movement can repeatedly load the edge of the socket component rather than distribute force appropriately. This uneven loading can contribute to instability and loosening as well as impaired movement.[2]
A reverse replacement creates a more constrained cup and ball arrangement with a fixed center around which the upper arm moves. It provides a stable fulcrum when the cuff cannot adequately center the natural ball. Changes in the position of the joint and humerus also alter the deltoid’s leverage, allowing it to produce elevation under mechanical conditions that would not support useful movement with an anatomic replacement.[3]
The reverse design does not restore every action of a healthy cuff. Turning the arm outward and reaching behind the back still depend on the remaining muscles, their condition, and the implant arrangement. Someone can regain useful forward elevation while retaining difficulty washing the lower back or positioning the hand behind the head. A functioning deltoid and its nerve supply remain necessary for active arm elevation.[3]
Anatomic replacement is commonly considered for arthritis when the cuff remains functional and the socket has suitable bone for fixation. Reverse replacement is used for several different problems, including an irreparable cuff tear with loss of function, selected complex fractures, and failed previous replacements. Substantial socket bone loss can also favor a reverse design despite an intact cuff.[3,4]
Bone loss changes the foundation available for the implant and the direction in which it can be positioned. A fracture can separate the cuff’s bony attachments from the rest of the humerus, while previous surgery can leave damaged tendons, scar tissue, or missing bone. Ask which finding influenced the recommendation and whether another design is reasonable. Reverse replacement changes the shoulder’s mechanics rather than simply providing a stronger version of an anatomic replacement.[3]
For arthritis, replacement becomes a reasonable discussion when pain and impaired arm use remain unacceptable despite appropriate nonsurgical care. Difficulty sleeping, dressing, washing, or performing necessary work can influence that decision more than an imaging finding alone. Medication, injections, activity changes, and rehabilitation remain alternatives when they provide acceptable function. Replacement after a severe fracture involves a different decision about whether the damaged joint can be reconstructed reliably.[1]
Describe the tasks you want to regain. Reaching the head, managing toileting, lifting a pan, and working overhead require different combinations of rotation, elevation, strength, and endurance. Ask which limitations are expected to improve and which could remain. Results after fracture reconstruction or revision surgery should not be predicted from someone else’s uncomplicated replacement for arthritis.[4,5]
Material risks include infection, bleeding, nerve injury, fracture, instability, and component wear or loosening. Some complications require another operation, and revision surgery can be more difficult when bone or tendons have been lost. Discuss the expected benefits and risks in relation to your original condition, previous procedures, and intended activities.[4]
Move commonly used items to accessible shelves, prepare clothing that opens at the front, and organize help with meals, bathing, and transportation. If you need both arms to stand from a chair or rely on a walker, tell the team before surgery. A safe transfer or mobility plan needs to avoid prohibited weight bearing through the operated arm and should be practiced before you need to perform it independently.[4,6]
Obtain a written medication plan from the surgical and anesthesia teams, including any coordinated interruption and restart of prescribed treatment. Do not independently stop a blood thinner or other long term medicine because a general checklist mentions it. Practice sling use and supported resting positions before the operation; support behind the elbow can keep the arm from dropping behind the body and stretching healing tissues.[4,6]
During many anatomic replacements, the surgeon releases the subscapularis to reach the joint and then repairs it. This rotator cuff muscle lies at the front of the shoulder and turns the arm inward. Turning outward stretches the repaired tissues, while actively turning inward makes the muscle pull through its attachment. Either action can stress the repair even without a weight in the hand.[7]
The repair can join tendon to tendon, tendon to bone, or a small bone fragment back to the humerus. Its condition and tension influence precautions. A biceps tenodesis introduces another attachment that needs protection. The surgical team should specify the permitted rotation and use of the arm because a healed skin incision does not establish that these deeper repairs are ready for loading.[7]
After reverse replacement, precautions depend on implant stability and associated repairs. Many plans initially restrict combinations of reaching behind the body and turning the arm inward. If replacement follows a fracture, the tuberosities, the fragments carrying cuff attachments, may also have been repaired. Sling duration and permitted movement therefore depend on more than the implant’s name.[4,8]
Obtain specific instructions for sleeping, washing, dressing, and exercise rather than removing the sling whenever the arm feels comfortable. Research on earlier movement after reverse replacement does not establish one schedule for every patient, particularly after fracture reconstruction, revision, or additional repairs.[8]
Keep the dressing clean and dry according to discharge instructions, and do not soak the incision until cleared. Increasing redness, drainage, fever, or escalating pain requires prompt contact with the surgical team. A newly cold or discolored hand, substantial new numbness or weakness, or a shoulder that suddenly appears displaced requires urgent assessment. Chest pain or shortness of breath requires emergency care.[9]
Passive movement uses external support to move the arm with minimal shoulder muscle effort. Assisted movement adds effort from the operated arm, while active movement requires its muscles to move the arm without help. Resistance exercise adds further force. Permission for one category does not include the next because each places different demands on the repair and joint.[10]
Once active elevation is permitted, body position changes the effort required. Supported or reclined practice can precede an upright reach, while keeping the elbow bent shortens the lever acting at the shoulder. Straightening the elbow or becoming more upright increases the demand before external weight is added.[7]
Once lifting is allowed, practice should develop the task being recovered. An empty hand reaching toward a shelf demands less force than placing a dish there, and putting away several dishes adds repetition. If the loaded task remains difficult, a lighter object or lower shelf can provide an intermediate demand. Increase the height, weight, or repetition according to the remaining restrictions and response rather than advancing everything together.[5,10]
Pain relief can precede recovery of strength and endurance. The ability to dress comfortably does not establish readiness for repeated overhead work, and easier movement does not prove that a tendon has healed. If exercise consistently reduces subsequent daily use, ask the rehabilitation team to review its amount, technique, and stage of progression.[7,10]
Improvement develops over months, with strength continuing to change after basic self care becomes manageable. Driving requires clearance and adequate vehicle control, including the ability to respond to an unexpected event. Do not drive while taking sedating opioid medication or assume that briefly moving the steering wheel demonstrates readiness.[6,10]
A prescribed home program and supervised rehabilitation both depend on practice between appointments. Supervision allows exercises to be adapted, difficult tasks to be practiced, and precautions to be checked. The required assistance depends on the reconstruction and the person’s ability to perform and progress the program safely.[5]
A randomized trial after primary reverse replacement found no significant difference in final movement or patient reported outcomes between a structured home program and formal physical therapy. Some participants assigned to home exercise crossed over to supervised care. The findings support selecting assistance according to need rather than prescribing identical attendance for everyone or concluding that rehabilitation is unnecessary.[11]
Swimming requires repeated elevation and rotation, gardening includes pushing and pulling, and heavy work can require sustained force at awkward reaches. Contact activities add impact risk. Discuss the weight, repetition, positions, and possibility of a fall or collision involved in the activity you want to resume rather than seeking clearance for “exercise” as a single category.[5]
There is no well established lifetime lifting limit that applies to every shoulder replacement. Repetitive heavy loading and high impact activity are commonly discouraged, but recommendations vary with the reconstruction and intended use. A comfortable lift does not establish that repeated exposure is appropriate for the implant or surrounding bone.[5]
An implant has no predetermined expiration date. Long term studies show that many remain in place for years, but estimates vary by procedure, design, and population. “Survival” usually means that revision surgery has not occurred; it does not establish that every unrevised shoulder is painless or unrestricted. Continue the follow up visits and imaging recommended by the surgeon.[12]
After reverse replacement, the deltoid continues to pull from the acromion and scapular spine, the bony roof and ridge of the shoulder blade. Stress injuries can develop in this bone without a fall. New focal pain over the top or back of the shoulder, particularly with reduced ability to raise the arm, warrants prompt surgical review. Stop strengthening and demanding arm use while seeking advice because early fractures are not always visible on routine X rays.[13]
Increasing stiffness, deep pain, or instability also warrants reassessment before rehabilitation is intensified. Causes include tendon failure, loosening, fracture, infection, and problems outside the replaced joint, such as a cervical nerve disorder. Some implant infections produce pain and stiffness without obvious fever or wound changes, and routine blood tests can remain normal. Treatment needs to address the cause rather than treating every deterioration as a need for more stretching or strengthening.[14]
American Academy of Orthopaedic Surgeons. Shoulder joint replacement. OrthoInfo. Accessed November 20, 2026.
Goetti P, Denard PJ, Collin P, Ibrahim M, Mazzolari A, Lädermann A. Biomechanics of anatomic and reverse shoulder arthroplasty. EFORT Open Reviews. 2021;6(10):918–931. doi:10.1302/2058-5241.6.210014.
Rugg CM, Coughlan MJ, Lansdown DA. Reverse total shoulder arthroplasty: biomechanics and indications. Current Reviews in Musculoskeletal Medicine. 2019;12(4):542–553. doi:10.1007/s12178-019-09586-y.
American Academy of Orthopaedic Surgeons. Reverse total shoulder replacement. OrthoInfo. Accessed November 20, 2026.
Howard MC, Trasolini NA, Waterman BR. Optimizing outcomes after reverse total shoulder arthroplasty: rehabilitation, expected outcomes, and maximizing return to activities. Current Reviews in Musculoskeletal Medicine. 2023;16(4):145–153. doi:10.1007/s12178-023-09823-5.
National Library of Medicine. Using your shoulder after replacement surgery. MedlinePlus Medical Encyclopedia. Reviewed November 7, 2024.
Kennedy JS, Garrigues GE, Pozzi F, Zens MJ, Gaunt B, Phillips B, Bakshi A, Tate AR. The American Society of Shoulder and Elbow Therapists’ consensus statement on rehabilitation for anatomic total shoulder arthroplasty. Journal of Shoulder and Elbow Surgery. 2020;29(10):2149–2162. doi:10.1016/j.jse.2020.05.019.
Sachinis NP, Yiannakopoulos CK, Berthold DP. Can we accelerate rehabilitation following reverse shoulder arthroplasty? A systematic review. Shoulder & Elbow. 2024;16(2):214–227. doi:10.1177/17585732221144007.
National Library of Medicine. Shoulder replacement: discharge. MedlinePlus Medical Encyclopedia. Reviewed November 7, 2024.
Polio W, Brolin TJ. Postoperative rehabilitation after shoulder arthroplasty. Physical Medicine and Rehabilitation Clinics of North America. 2023;34(2):469–479. doi:10.1016/j.pmr.2022.12.010.
Chalmers PN, Tashjian RZ, Keener JD, Sefko JA, Da Silva A, Morrissey C, Presson AP, Zhang C, Chamberlain AM. Active physical therapy does not improve outcomes after reverse total shoulder arthroplasty: a multi-center, randomized clinical trial. Journal of Shoulder and Elbow Surgery. 2023;32(4):760–770. doi:10.1016/j.jse.2022.12.011.
Evans JP, Evans JT, Craig RS, Mohammad HR, Sayers A, Blom AW, Whitehouse MR, Rees JL. How long does a shoulder replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 10 years of follow-up. The Lancet Rheumatology. 2020;2(9):e539–e548. doi:10.1016/S2665-9913(20)30226-5.
Mayne IP, Bell SN, Wright W, Coghlan JA. Acromial and scapular spine fractures after reverse total shoulder arthroplasty. Shoulder & Elbow. 2016;8(2):90–100. doi:10.1177/1758573216628783.
Hagedorn JM, Pittelkow TP, Bendel MA, Moeschler SM, Orhurhu V, Sanchez-Sotelo J. The painful shoulder arthroplasty: appropriate work-up and review of interventional pain treatments. JSES Reviews, Reports, and Techniques. 2022;2(3):269–276. doi:10.1016/j.xrrt.2022.04.008.